Vacuum bag is a very common packaging bag in our real life. Basically, it can be said that it is inseparable. For example, food, vegetables, frozen meat products and so on are everywhere. Here is a brief introduction to how to use the vacuum bag correctly and what should be paid attention to when using it.
First of all, let’s understand how vacuum compression bags are differentiated according to materials: they are MOPE film and high-strength composite film, which are described in detail in the certificate content on the lower right corner of the reverse side of the outer package. The high-strength composite film is a replacement of MOPE film, which is the latest product of this year, with better quality and better sealing performance.
Secondly, there are five key points for the use and precautions of vacuum compression bag, as follows:
1. Clothes, quilts and other items should be placed in vacuum compression bags as far as possible, at least 3-5 cm away from the sealing zipper. Do not force large items into it.
2. When using the air pump, screw the screw of the air pump to the end and press the white rubber gasket at the air outlet to ensure that there is no air leakage at the outlet. Generally, a large vacuum compression bag needs to be pumped for 3-5 minutes. It takes about 3 to 5 minutes. After three or five hundred times, there will be obvious flattening. When using the air pump, pay attention to continuous pumping, and it is better not to stop. It’s better to have a vacuum cleaner at home, which is labor-saving and convenient
3. Before and after inflation, pay attention to the vacuum compression bag. Do not let sharp objects scratch. It is better to operate on the bed or clean desktop. If there are buttons, zippers and other hard objects in the stored items, please fold them up and put them into the collection bag. When storing in the cabinet or other places, pay attention to whether there are sharp objects in the storage place to ensure the integrity of the bag.
4. To ensure the cleanness of the sealed zipper part of the vacuum bag, if fibers and dust enter, the sealing performance will be reduced. It is recommended to wipe with gauze dipped in water before closing the zipper. After closing the zipper, please hold the slider with your hand and pull it back and forth at the seal several times to ensure that the two ribs of the seal are fully buckled into the groove to ensure the sealing effect.
5. After pumping, please check the sealing again to ensure the sealing.
The above is about how to use the vacuum bag correctly and the precautions for use. Do you understand it after reading it? I hope it will be helpful to you.